Questions

8 Responses to "Questions"

  1. Can we use x550 and mx100d or mx100s on same host machine?
    According to you which is the best possible device for virtualization in a school?

    Reply
    1. Hi Harry,

      X550 and MX100D / MX100S are all 3 different technology.
      You cannot run X550 along with MX100 Series, as X550 is old technology with PCI card and only support up-to Windows 7 and Windows 2008R2, whereas MX100D is on PCIe and MS100S is LAN based and support up-to Windows 10.

      I will recommended you go with MX100S / MX100D for school.

      Reply
    1. Hi Anil,
      NComputing as release the new vSpace Pro 10 for Windows 10 (Only 64 Bits OS) and which can be download from NComputing Software Download Center.

      vSpace Pro 10 supports L Series (L250 / L300 / 350) and M Series (M300) along with new product in M Series which is MX100 series.

      Available Firmware for L series (L250 / L300 / L350): – 1.11.17
      Available Firmware for L series (M300 / MX100): – 2.3.11

      Hope this helps you.

      Reply
  2. Hello Girish ji,

    I need to install and configure nComputing vSpace 8.4.0.3B on Non-Genuine Windows Server 2012 R2 64 Bit. How can I do this. Please help.
    Thanks.

    Reply
  3. Hi,

    We have ncomputing L300s that freeze up our Dell Inspiron i5-4460 minitower. This happens when the l300 connects the dell will try to install virtual usb drivers that crash the system. NComputing tech support said they are not compatible with some Dells. So do you know of an alternative to ncomputing to share one PC among two stations?
    Thanks.

    Reply
    1. Hi David,

      Request you to please help me with below details and will try to solve you issue.

      1) Windows Version (32 bit / 64 bit) / Service Pack
      2) vSpace Version
      3) L300 Firmware

      and also make sure you have update the BIOS and Firmware of your Dell Inspiron i5-4460 minitower.

      Reply

Post Comment

Time limit is exhausted. Please reload CAPTCHA.